EngineSim works in two modes: Design Mode or Tunnel Test Mode. In the Design Mode, you can change design variables including the flight conditions, the engine size, the inlet performance, the turbo machinery compressor and turbine performance, the combustors or burner performance, or the nozzle performance. For a turbofan engine design you can also vary the fan performance and the bypass ratio. When you have a design that you like, you can switch to the Tunnel Test Mode, where you can vary only the flight conditions (airspeed, altitude, and throttle setting).

This program is designed to be interactive, so you have to work with the program. There are a variety of choices which you must make regarding the analysis and the display of results by using a choice box. A choice box has a descriptive word displayed and an arrow at the right of the box. To make a choice, click on the arrow, hold down and drag to make your selection. The current values of the design variables are presented to you in boxes. By convention, a white box with black numbers is an input box and you can change the value of the number. A black box with yellow or red numbers is an output box and the value is computed by the program. To change the value in an input box, select the box by moving the cursor into the box and clicking the mouse, then backspace over the old number, enter a new number, then hit the Enter key on your keyboard. You must hit Enter to send the new value to the program. For most input variables you can also use a slider located next to the input box. Click on the slider bar, hold down and drag the slider bar to change values, or you can click on the arrows at either end of the slider. If you experience difficulties when using the sliders to change variables, simply click away from the slider and then back to it. If the arrows on the end of the sliders disappear, click in the areas where the left and right arrow images should appear, and they should reappear. At any time, to return to the original default conditions, click the red Reset button at the upper right of the program.

The license of this software is Freeware, you can free download and free use this calculator software.